Ruptela Ruptela2 (secondary port) on TrackeraX
The Ruptela Ruptela2 (secondary port) is a GPS tracker that works with TrackeraX over the ruptela2 protocol on port 6302. From the platform it accepts custom commands. The server decodes 7 alarm types from this protocol, such as accident, gps antenna cut and harsh acceleration.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6302 (ruptela2 protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Ruptela Ruptela2 (secondary port) model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the ruptela2 protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Chargingcharge
- Device temperaturedeviceTemp
- Driver ID (RFID / iButton)driverUniqueId
- Fault codes (DTC)dtcs
- Engine loadengineLoad
- Fuelfuel
- Fuel consumptionfuelConsumption
- Fuel levelfuelLevel
- Fuel usedfuelUsed
- HDOPhdop
- Ignitionignition
- Photoimage
- Motionmotion
- OBD odometerobdOdometer
- OBD speedobdSpeed
- Odometerodometer
- Mobile operatoroperator
- External powerpower
- RPMrpm
- Satellitessat
- Trip odometertripOdometer
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- IO elements (io1, io2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Accidentaccident
- GPS antenna cutgpsAntennaCut
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Jammingjamming
- Tamperingtampering
- Towingtow
[ Protocol-specific attributes ]
di · tagId
[ Other Ruptela models ]
Ruptela Ruptela2 (secondary port) FAQ
Which port does the Ruptela Ruptela2 (secondary port) use to connect to TrackeraX?
The Ruptela Ruptela2 (secondary port) uses the ruptela2 protocol and connects to port 6302 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Ruptela Ruptela2 (secondary port) send to the platform?
TrackeraX reads 26 parameters of the ruptela2 protocol on this device, for example: Battery voltage, Charging, Device temperature, Driver ID (RFID / iButton), Fault codes (DTC). Each one can become a sensor or an alert.
Which alarms does the Ruptela Ruptela2 (secondary port) report?
TrackeraX recognizes these ruptela2 alarms: Accident, GPS antenna cut, Harsh acceleration, Harsh braking, Jamming. Any of them can become an email, push or webhook notification.
How do I add the Ruptela Ruptela2 (secondary port) to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6302 and create it in TrackeraX with its IMEI, choosing the Ruptela Ruptela2 (secondary port) model.
Try the Ruptela2 (secondary port) on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

