[ GPS device ]

Sanav CT-58 on TrackeraX

The Sanav CT-58 is a GPS tracker that works with TrackeraX over the sanav protocol on port 6051. From the platform it accepts custom commands. The server decodes 1 alarm type from this protocol, such as low battery.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6051 (sanav protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Sanav CT-58 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the sanav protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Chargingcharge
  • Ignitionignition

Numbered inputs and sensors

  • Inputs (in1, in2…)
  • Outputs (out1, out2…)

[ Alarms the protocol can report ]

  • Low batterylowBattery

[ Other Sanav models ]

Sanav CT-58 FAQ

Which port does the Sanav CT-58 use to connect to TrackeraX?

The Sanav CT-58 uses the sanav protocol and connects to port 6051 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Sanav CT-58 send to the platform?

TrackeraX reads 4 parameters of the sanav protocol on this device, for example: Charging, Ignition. Each one can become a sensor or an alert.

Which alarms does the Sanav CT-58 report?

TrackeraX recognizes these sanav alarms: Low battery. Any of them can become an email, push or webhook notification.

How do I add the Sanav CT-58 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6051 and create it in TrackeraX with its IMEI, choosing the Sanav CT-58 model.

Try the CT-58 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.