[ GPS device ]

Sanav MT-101 on TrackeraX

The Sanav MT-101 is a vehicle tracker with 2G (GSM/GPRS). In TrackeraX it connects over the sanav protocol on port 6051 and accepts 1 command from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6051 (sanav protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Sanav MT-101 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the sanav protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Chargingcharge
  • Ignitionignition

Numbered inputs and sensors

  • Inputs (in1, in2…)
  • Outputs (out1, out2…)

[ Alarms the protocol can report ]

  • Low batterylowBattery

[ Other Sanav models ]

Sanav MT-101 FAQ

Which port does the Sanav MT-101 use to connect to TrackeraX?

The Sanav MT-101 uses the sanav protocol and connects to port 6051 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Sanav MT-101 send to the platform?

TrackeraX reads 4 parameters of the sanav protocol on this device, for example: Charging, Ignition. Each one can become a sensor or an alert.

Which alarms does the Sanav MT-101 report?

TrackeraX recognizes these sanav alarms: Low battery. Any of them can become an email, push or webhook notification.

How do I add the Sanav MT-101 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6051 and create it in TrackeraX with its IMEI, choosing the Sanav MT-101 model.

Try the MT-101 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.