[ GPS device ]

Santel Granit-Navigator 4.11 on TrackeraX

The Santel Granit-Navigator 4.11 is a GPS tracker that works with TrackeraX over the ndtpv6 protocol on port 6243. From the platform it accepts custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6243 (ndtpv6 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Santel Granit-Navigator 4.11 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the ndtpv6 protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Accelerationacceleration
  • GPS antennaantenna
  • Battery voltagebattery
  • Battery levelbatteryLevel
  • GPS statusgps
  • OBD speedobdSpeed
  • Odometerodometer
  • PDOPpdop
  • External powerpower
  • Satellitessat

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)

[ Other Santel models ]

[ Other devices on the ndtpv6 protocol ]

Santel Granit-Navigator 4.11 FAQ

Which port does the Santel Granit-Navigator 4.11 use to connect to TrackeraX?

The Santel Granit-Navigator 4.11 uses the ndtpv6 protocol and connects to port 6243 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Santel Granit-Navigator 4.11 send to the platform?

TrackeraX reads 11 parameters of the ndtpv6 protocol on this device, for example: Acceleration, GPS antenna, Battery voltage, Battery level, GPS status. Each one can become a sensor or an alert.

How do I add the Santel Granit-Navigator 4.11 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6243 and create it in TrackeraX with its IMEI, choosing the Santel Granit-Navigator 4.11 model.

Try the Granit-Navigator 4.11 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.