Santel Granit-V6 on TrackeraX
The Santel Granit-V6 is a vehicle tracker. In TrackeraX it connects over the ndtpv6 protocol on port 6243 and accepts 1 command from the platform.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6243 (ndtpv6 protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Santel Granit-V6 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the ndtpv6 protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Accelerationacceleration
- GPS antennaantenna
- Battery voltagebattery
- Battery levelbatteryLevel
- GPS statusgps
- OBD speedobdSpeed
- Odometerodometer
- PDOPpdop
- External powerpower
- Satellitessat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
[ Other Santel models ]
[ Other devices on the ndtpv6 protocol ]
Santel Granit-V6 FAQ
Which port does the Santel Granit-V6 use to connect to TrackeraX?
The Santel Granit-V6 uses the ndtpv6 protocol and connects to port 6243 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Santel Granit-V6 send to the platform?
TrackeraX reads 11 parameters of the ndtpv6 protocol on this device, for example: Acceleration, GPS antenna, Battery voltage, Battery level, GPS status. Each one can become a sensor or an alert.
How do I add the Santel Granit-V6 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6243 and create it in TrackeraX with its IMEI, choosing the Santel Granit-V6 model.
Try the Granit-V6 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

