[ GPS device ]

Teltonika Teltonika2 (secondary port) on TrackeraX

The Teltonika Teltonika2 (secondary port) is a GPS tracker that works with TrackeraX over the teltonika2 protocol on port 7028. From the platform it accepts custom commands. The server decodes 11 alarm types from this protocol, such as accident, geofence entry and geofence exit.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 7028 (teltonika2 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Teltonika Teltonika2 (secondary port) model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the teltonika2 protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Battery levelbatteryLevel
  • Coolant temperaturecoolantTemp
  • Device temperaturedeviceTemp
  • Doordoor
  • Driver ID (RFID / iButton)driverUniqueId
  • Fault codes (DTC)dtcs
  • energyenergy
  • energyLevelenergyLevel
  • Engine loadengineLoad
  • Engine temperatureengineTemp
  • Fuelfuel
  • Fuel consumptionfuelConsumption
  • Fuel levelfuelLevel
  • Fuel usedfuelUsed
  • HDOPhdop
  • SIM ICCIDiccid
  • Ignitionignition
  • Photoimage
  • Motionmotion
  • OBD odometerobdOdometer
  • OBD speedobdSpeed
  • Odometerodometer
  • Mobile operatoroperator
  • PDOPpdop
  • External powerpower
  • Roamingroaming
  • RPMrpm
  • GSM signalrssi
  • Satellitessat
  • Throttlethrottle
  • Trip odometertripOdometer
  • VDOPvdop
  • VINvin

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • IO elements (io1, io2…)
  • Outputs (out1, out2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Accidentaccident
  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Harsh corneringhardCornering
  • Idlingidle
  • Jammingjamming
  • Power cutpowerCut
  • SOSsos
  • Towingtow

[ Protocol-specific attributes ]

axisX · axisY · axisZ · axle · batteryCurrent · beacon · bleCombinedFuel · bleTemp1 · bleTemp2 · bleTemp3 · bleTemp4 · button · cid2g · cid4g · combinedFuel · dataMode · di1 · di2 · di3 · di4 · eyePitch1 · eyeRoll1 · eyeRoll2 · eyeRoll3 · eyeRoll4 · eyeTemp1 · eyeTemp2 · eyeTemp3 · eyeTemp4 · faultCount · hybridBatteryLevel · lac · loadTrailer · loadTruck · milDistance · networkType · priority · sleepMode · tag · tempProbe1 and 10 more

[ Other Teltonika models ]

Teltonika Teltonika2 (secondary port) FAQ

Which port does the Teltonika Teltonika2 (secondary port) use to connect to TrackeraX?

The Teltonika Teltonika2 (secondary port) uses the teltonika2 protocol and connects to port 7028 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Teltonika Teltonika2 (secondary port) send to the platform?

TrackeraX reads 39 parameters of the teltonika2 protocol on this device, for example: Battery voltage, Battery level, Coolant temperature, Device temperature, Door. Each one can become a sensor or an alert.

Which alarms does the Teltonika Teltonika2 (secondary port) report?

TrackeraX recognizes these teltonika2 alarms: Accident, Geofence entry, Geofence exit, Harsh acceleration, Harsh braking. Any of them can become an email, push or webhook notification.

How do I add the Teltonika Teltonika2 (secondary port) to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 7028 and create it in TrackeraX with its IMEI, choosing the Teltonika Teltonika2 (secondary port) model.

Try the Teltonika2 (secondary port) on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.