VJOY Car Electronics T Series on TrackeraX
The VJOY Car Electronics T Series is a GPS tracker that works with TrackeraX over the tk103 protocol on port 6002 / 6013. From the platform it supports engine stop, engine resume and request position, plus custom commands. The server decodes 16 alarm types from this protocol, such as accident, geofence exit and harsh acceleration.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6002 / 6013 (tk103 protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the VJOY Car Electronics T Series model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Request positionpositionSingle
- Reporting intervalpositionPeriodic
- Stop reportingpositionStop
- Reboot devicerebootDevice
- Firmware versiongetVersion
- Power offpowerOff
- Device statusgetDeviceStatus
- SOS alarmalarmSos
- SOS numbersosNumber
- Output controloutputControl
- Device identificationdeviceIdentification
- Deep sleep modemodeDeepSleep
- Power saving modemodePowerSaving
- Server connectionsetConnection
- Set odometersetOdometer
- Custom commandcustom
[ Data reported by the tk103 protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Battery levelbatteryLevel
- Blockedblocked
- Chargingcharge
- Doordoor
- energyLevelenergyLevel
- Fuelfuel
- Ignitionignition
- Odometerodometer
- External powerpower
- VINvin
Numbered inputs and sensors
- Inputs (in1, in2…)
- Outputs (out1, out2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Accidentaccident
- Geofence exitgeofenceExit
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Idlingidle
- Low batterylowBattery
- Low powerlowPower
- Low speedlowspeed
- Movementmovement
- Overspeedoverspeed
- Power cutpowerCut
- Removalremoving
- SOSsos
- Tamperingtampering
- Temperaturetemperature
- Vibrationvibration
[ Protocol-specific attributes ]
batteryOverheat · batteryTemp · calibrationCapacity · cellTemp · chargeProtection · cumulativeVoltage · current · cycles · dischargeCapacity · dischargeProtection · equilibriumTemp · faultAlarm · gatherVoltage · hs · ls · maxCellVoltage · maxCellVoltageCount · maxTemp · maxTempCount · minCellVoltage · minCellVoltageCount · minTemp · minTempCount · panic · powerTemp
[ Other devices on the tk103 protocol ]
VJOY Car Electronics T Series FAQ
Which port does the VJOY Car Electronics T Series use to connect to TrackeraX?
The VJOY Car Electronics T Series uses the tk103 protocol and connects to port 6002 / 6013 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the VJOY Car Electronics T Series send to the platform?
TrackeraX reads 14 parameters of the tk103 protocol on this device, for example: Battery voltage, Battery level, Blocked, Charging, Door. Each one can become a sensor or an alert.
Can I send commands to the VJOY Car Electronics T Series from TrackeraX?
Yes. From the map or the device page you can send 17 command types to the VJOY Car Electronics T Series, including: Engine stop, Engine resume, Request position, Reporting interval, Stop reporting.
Which alarms does the VJOY Car Electronics T Series report?
TrackeraX recognizes these tk103 alarms: Accident, Geofence exit, Harsh acceleration, Harsh braking, Idling. Any of them can become an email, push or webhook notification.
How do I add the VJOY Car Electronics T Series to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6002 / 6013 and create it in TrackeraX with its IMEI, choosing the VJOY Car Electronics T Series model.
Try the VJOY Car Electronics T Series on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

