[ GPS device ]

Xexun TK103 on TrackeraX

The Xexun TK103 is a vehicle tracker. It comes with an internal battery. In TrackeraX it connects over the tk103 protocol on port 6002 and accepts 18 commands from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6002 (tk103 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Xexun TK103 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Hardware and connectivity ]

  • Internal battery

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Request positionpositionSingle
  • Reporting intervalpositionPeriodic
  • Stop reportingpositionStop
  • Reboot devicerebootDevice
  • Firmware versiongetVersion
  • Power offpowerOff
  • Device statusgetDeviceStatus
  • SOS alarmalarmSos
  • SOS numbersosNumber
  • Output controloutputControl
  • Device identificationdeviceIdentification
  • Deep sleep modemodeDeepSleep
  • Power saving modemodePowerSaving
  • Server connectionsetConnection
  • Set odometersetOdometer
  • Custom commandcustom

[ Data reported by the tk103 protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Battery levelbatteryLevel
  • Blockedblocked
  • Chargingcharge
  • Doordoor
  • energyLevelenergyLevel
  • Fuelfuel
  • Ignitionignition
  • Odometerodometer
  • External powerpower
  • VINvin

Numbered inputs and sensors

  • Inputs (in1, in2…)
  • Outputs (out1, out2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Accidentaccident
  • Geofence exitgeofenceExit
  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Idlingidle
  • Low batterylowBattery
  • Low powerlowPower
  • Low speedlowspeed
  • Movementmovement
  • Overspeedoverspeed
  • Power cutpowerCut
  • Removalremoving
  • SOSsos
  • Tamperingtampering
  • Temperaturetemperature
  • Vibrationvibration

[ Protocol-specific attributes ]

batteryOverheat · batteryTemp · calibrationCapacity · cellTemp · chargeProtection · cumulativeVoltage · current · cycles · dischargeCapacity · dischargeProtection · equilibriumTemp · faultAlarm · gatherVoltage · hs · ls · maxCellVoltage · maxCellVoltageCount · maxTemp · maxTempCount · minCellVoltage · minCellVoltageCount · minTemp · minTempCount · panic · powerTemp

[ Other Xexun models ]

[ Other devices on the tk103 protocol ]

Xexun TK103 FAQ

Which port does the Xexun TK103 use to connect to TrackeraX?

The Xexun TK103 uses the tk103 protocol and connects to port 6002 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Xexun TK103 send to the platform?

TrackeraX reads 14 parameters of the tk103 protocol on this device, for example: Battery voltage, Battery level, Blocked, Charging, Door. Each one can become a sensor or an alert.

Can I send commands to the Xexun TK103 from TrackeraX?

Yes. From the map or the device page you can send 17 command types to the Xexun TK103, including: Engine stop, Engine resume, Request position, Reporting interval, Stop reporting.

Which alarms does the Xexun TK103 report?

TrackeraX recognizes these tk103 alarms: Accident, Geofence exit, Harsh acceleration, Harsh braking, Idling. Any of them can become an email, push or webhook notification.

How do I add the Xexun TK103 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6002 and create it in TrackeraX with its IMEI, choosing the Xexun TK103 model.

Try the Xexun TK103 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.