[ GPS device ]

Wialon MasterKit on TrackeraX

The Wialon MasterKit is a GPS tracker that works with TrackeraX over the wialon protocol on port 6039. From the platform it supports output control, reboot device and send ussd, plus custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6039 (wialon protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Wialon MasterKit model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Output controloutputControl
  • Reboot devicerebootDevice
  • Send USSDsendUssd
  • Device identificationdeviceIdentification
  • Custom commandcustom

[ Data reported by the wialon protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery levelbatteryLevel
  • Device temperaturedeviceTemp
  • Driver ID (RFID / iButton)driverUniqueId
  • HDOPhdop
  • Digital inputsinput
  • Digital outputsoutput
  • Satellitessat

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)

[ Other Wialon models ]

[ Other devices on the wialon protocol ]

Wialon MasterKit FAQ

Which port does the Wialon MasterKit use to connect to TrackeraX?

The Wialon MasterKit uses the wialon protocol and connects to port 6039 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Wialon MasterKit send to the platform?

TrackeraX reads 8 parameters of the wialon protocol on this device, for example: Battery level, Device temperature, Driver ID (RFID / iButton), HDOP, Digital inputs. Each one can become a sensor or an alert.

Can I send commands to the Wialon MasterKit from TrackeraX?

Yes. From the map or the device page you can send 4 command types to the Wialon MasterKit, including: Output control, Reboot device, Send USSD, Device identification.

How do I add the Wialon MasterKit to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6039 and create it in TrackeraX with its IMEI, choosing the Wialon MasterKit model.

Try the MasterKit on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.