[ GPS device ]

Wondex VT350 on TrackeraX

The Wondex VT350 is a GPS tracker that works with TrackeraX over the wondex protocol on port 6032. From the platform it supports request position, reboot device and device status, plus custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6032 (wondex protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Wondex VT350 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Request positionpositionSingle
  • Reboot devicerebootDevice
  • Device statusgetDeviceStatus
  • Modem statusgetModemStatus
  • Firmware versiongetVersion
  • Device identificationdeviceIdentification
  • Custom commandcustom

[ Data reported by the wondex protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Digital inputsinput
  • Odometerodometer
  • Digital outputsoutput
  • Satellitessat

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)

[ Other Wondex models ]

[ Other devices on the wondex protocol ]

Wondex VT350 FAQ

Which port does the Wondex VT350 use to connect to TrackeraX?

The Wondex VT350 uses the wondex protocol and connects to port 6032 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Wondex VT350 send to the platform?

TrackeraX reads 6 parameters of the wondex protocol on this device, for example: Battery voltage, Digital inputs, Odometer, Digital outputs, Satellites. Each one can become a sensor or an alert.

Can I send commands to the Wondex VT350 from TrackeraX?

Yes. From the map or the device page you can send 6 command types to the Wondex VT350, including: Request position, Reboot device, Device status, Modem status, Firmware version.

How do I add the Wondex VT350 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6032 and create it in TrackeraX with its IMEI, choosing the Wondex VT350 model.

Try the VT350 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.