WondeX SPT-10 on TrackeraX
The WondeX SPT-10 is a GPS tracker that works with TrackeraX over the wondex protocol on port 6032. From the platform it supports request position, reboot device and device status, plus custom commands.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6032 (wondex protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the WondeX SPT-10 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Request positionpositionSingle
- Reboot devicerebootDevice
- Device statusgetDeviceStatus
- Modem statusgetModemStatus
- Firmware versiongetVersion
- Device identificationdeviceIdentification
- Custom commandcustom
[ Data reported by the wondex protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Digital inputsinput
- Odometerodometer
- Digital outputsoutput
- Satellitessat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
[ Other Wondex models ]
[ Other devices on the wondex protocol ]
WondeX SPT-10 FAQ
Which port does the WondeX SPT-10 use to connect to TrackeraX?
The WondeX SPT-10 uses the wondex protocol and connects to port 6032 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the WondeX SPT-10 send to the platform?
TrackeraX reads 6 parameters of the wondex protocol on this device, for example: Battery voltage, Digital inputs, Odometer, Digital outputs, Satellites. Each one can become a sensor or an alert.
Can I send commands to the WondeX SPT-10 from TrackeraX?
Yes. From the map or the device page you can send 6 command types to the WondeX SPT-10, including: Request position, Reboot device, Device status, Modem status, Firmware version.
How do I add the WondeX SPT-10 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6032 and create it in TrackeraX with its IMEI, choosing the WondeX SPT-10 model.
Try the WondeX SPT-10 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

