[ GPS device ]

Xexun X23 on TrackeraX

The Xexun X23 is a GPS tracker that works with TrackeraX over the xexun2 protocol on port 6233. From the platform it supports reporting interval, power off and reboot device, plus custom commands. The server decodes 3 alarm types from this protocol, such as fall, removal and sos.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6233 (xexun2 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Xexun X23 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Reporting intervalpositionPeriodic
  • Power offpowerOff
  • Reboot devicerebootDevice
  • Custom commandcustom

[ Data reported by the xexun2 protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery levelbatteryLevel
  • Chargingcharge
  • GSM signalrssi
  • Satellitessat

[ Alarms the protocol can report ]

  • FallfallDown
  • Removalremoving
  • SOSsos

[ Other Xexun models ]

Xexun X23 FAQ

Which port does the Xexun X23 use to connect to TrackeraX?

The Xexun X23 uses the xexun2 protocol and connects to port 6233 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Xexun X23 send to the platform?

TrackeraX reads 4 parameters of the xexun2 protocol on this device, for example: Battery level, Charging, GSM signal, Satellites. Each one can become a sensor or an alert.

Can I send commands to the Xexun X23 from TrackeraX?

Yes. From the map or the device page you can send 3 command types to the Xexun X23, including: Reporting interval, Power off, Reboot device.

Which alarms does the Xexun X23 report?

TrackeraX recognizes these xexun2 alarms: Fall, Removal, SOS. Any of them can become an email, push or webhook notification.

How do I add the Xexun X23 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6233 and create it in TrackeraX with its IMEI, choosing the Xexun X23 model.

Try the X23 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.