[ GPS device ]

Xexun v03 on TrackeraX

The Xexun v03 is a GPS tracker that works with TrackeraX over the xexun3 protocol on port 6264. From the platform it accepts custom commands. The server decodes 11 alarm types from this protocol, such as accident, door and fall.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6264 (xexun3 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Xexun v03 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the xexun3 protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery levelbatteryLevel
  • Chargingcharge
  • Fuel levelfuelLevel
  • Heart rateheartRate
  • SIM ICCIDiccid
  • Motionmotion
  • GSM signalrssi
  • Satellitessat
  • Stepssteps

[ Alarms the protocol can report ]

  • Accidentaccident
  • Doordoor
  • FallfallDown
  • Low batterylowBattery
  • Movementmovement
  • Power cutpowerCut
  • Power offpowerOff
  • Power onpowerOn
  • Power restoredpowerRestored
  • Removalremoving
  • SOSsos

[ Protocol-specific attributes ]

temperature · trackingDuration

[ Other Xexun models ]

Xexun v03 FAQ

Which port does the Xexun v03 use to connect to TrackeraX?

The Xexun v03 uses the xexun3 protocol and connects to port 6264 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Xexun v03 send to the platform?

TrackeraX reads 9 parameters of the xexun3 protocol on this device, for example: Battery level, Charging, Fuel level, Heart rate, SIM ICCID. Each one can become a sensor or an alert.

Which alarms does the Xexun v03 report?

TrackeraX recognizes these xexun3 alarms: Accident, Door, Fall, Low battery, Movement. Any of them can become an email, push or webhook notification.

How do I add the Xexun v03 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6264 and create it in TrackeraX with its IMEI, choosing the Xexun v03 model.

Try the Xexun v03 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.