[ GPS device ]

Xexun XT008 on TrackeraX

The Xexun XT008 is a vehicle tracker with 2G (GSM/GPRS). In TrackeraX it connects over the xexun protocol on port 6006 and accepts 3 commands from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6006 (xexun protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Xexun XT008 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Custom commandcustom

[ Data reported by the xexun protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Ignitionignition
  • External powerpower
  • Satellitessat

[ Alarms the protocol can report ]

  • Low batterylowBattery
  • Movementmovement
  • SOSsos

[ Protocol-specific attributes ]

number · serial · signal

[ Other Xexun models ]

Xexun XT008 FAQ

Which port does the Xexun XT008 use to connect to TrackeraX?

The Xexun XT008 uses the xexun protocol and connects to port 6006 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Xexun XT008 send to the platform?

TrackeraX reads 3 parameters of the xexun protocol on this device, for example: Ignition, External power, Satellites. Each one can become a sensor or an alert.

Can I send commands to the Xexun XT008 from TrackeraX?

Yes. From the map or the device page you can send 2 command types to the Xexun XT008, including: Engine stop, Engine resume.

Which alarms does the Xexun XT008 report?

TrackeraX recognizes these xexun alarms: Low battery, Movement, SOS. Any of them can become an email, push or webhook notification.

How do I add the Xexun XT008 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6006 and create it in TrackeraX with its IMEI, choosing the Xexun XT008 model.

Try the XT008 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.