Skypatrol SP4600 on TrackeraX
The Skypatrol SP4600 is a vehicle tracker with 2G (GSM/GPRS). In TrackeraX it connects over the gosafe protocol on port 6078 and accepts 1 command from the platform.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6078 (gosafe protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Skypatrol SP4600 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the gosafe protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Driver ID (RFID / iButton)driverUniqueId
- Geofencegeofence
- HDOPhdop
- Engine hourshours
- Ignitionignition
- Odometerodometer
- External powerpower
- Satellitessat
- VDOPvdop
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- Outputs (out1, out2…)
- Temperature sensors (temp1, temp2…)
[ Protocol-specific attributes ]
eventData · eventStatus · obd · packetType · tagData
[ Other Skypatrol models ]
[ Other devices on the gosafe protocol ]
Skypatrol SP4600 FAQ
Which port does the Skypatrol SP4600 use to connect to TrackeraX?
The Skypatrol SP4600 uses the gosafe protocol and connects to port 6078 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Skypatrol SP4600 send to the platform?
TrackeraX reads 14 parameters of the gosafe protocol on this device, for example: Battery voltage, Driver ID (RFID / iButton), Geofence, HDOP, Engine hours. Each one can become a sensor or an alert.
How do I add the Skypatrol SP4600 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6078 and create it in TrackeraX with its IMEI, choosing the Skypatrol SP4600 model.
Try the Skypatrol SP4600 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

